Panasonic TY-FB10WPU - Manual (Page 46)

46
Using WebBrowser
(cont.)
Detailed Network Settings Screen (3/3)
6
AUTHENTICATION:OPEN or SHARED AUTHENTICATION:WPA-PSK
ENCRYPTION: Used to select and set the encryption system.
NONE: When no encryption is used. This can be selected when [AUTHENTICATION] is [OPEN] or [SHARED].
WEP*: When WEP is used for the encryption system.
KEY1 to KEY4: Selects the key numbers to use by default and sets the keys.
64-bit or 128-bit WEP keys can be set.
If a 64-bit key is selected, enter 5 one-byte alphanumeric characters (10 digits when using hexadecimal)
If a 128-bit key is selected, enter 13 one-byte alphanumeric characters (26 digits when using hexadecimal)
AES*: When using AES for the encryption system.
This can be selected when [AUTHENTICATION] is [WPA-PSK].
KEY: Sets the key.
KEY can be set using 8 to 63 alphanumeric characters or 64 hexadecimal digits.
TKIP*: When using TKIP for the encryption system.
This can be selected when [AUTHENTICATION] is [WPA-PSK].
KEY: Sets the key.
KEY can be set using 8 to 63 alphanumeric characters or 64 hexadecimal digits.
* “Glossary” (See page 55)