Panasonic TY-FB10WPU - Manual (Page 42)

42
• No password is set when shipped from the factory.
• Password used in this page is for accessing the web control window. (See page 48)
• If you forget the password, initialize the unit using the remote control. (See page 53)
• The top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] +
[R] keys for example to update the screen.
• Connection cannot be made while the WebBrowser is set to dial-up network.
Cancel the dial-up network setting.
• It may take some moments for WebBrowser to start up.
Using WebBrowser
(cont.)
Description of Each Screen
The following initial screen (monitor information) is displayed once authentication at time of startup has ended.
Notes
Menu items are displayed
The HOSTNAME and firmware version of the unit are displayed
Submenus for each menu are
displayed
Contents of each menu are
displayed