Panasonic TY-FB10WPU - Manual (Page 31)

31
Click [ ] on the launcher.
The displays selected in step 5 will begin displaying.
7
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit). 6
• Units in the same network are selectable.
• When one of the selected units is communicating with another computer, or its display screen is not set to full screen display,
the images are displayed onto the other selected units.
• The greater the number of units, the slower the transmission.
• Clicking [
] on the launcher allows you to make various picture quality and live mode settings on the “Option” window.
• Sound cannot be output in the multiple source live mode.
• If the connection error occurs during image output, the message ‘Stop “Live mode”’ will appear, then restart live by clicking
launcher buttons.
Quitting multiple source live mode
Click [ ] on the launcher again.
Various display methods
(cont.)
Notes