Pure Digital Pure Contour Air 200i - Manual (Page 22)

22
Updating software using Contour Setup Manager
1. Click the Upgrade tab and then
click the Upgrade button.
2. The following dialogue box will appear,
asking if you want to update Contour
software via the Ethernet. Click OK to
confirm.
4. The following window will
appear. Click Browse and
navigate to the location on your
computer that you downloaded
the software to.
5. Click Upload.
3. Wait for the LED to change from
white red slow flash to white
blue slow flash (this can take
up to 6 minutes) and move to
step 4.