Pure Digital Pure Contour Air 200i - Manual (Page 23)

23
6. The following window will appear,
summarising the software update
task. Click Upgrade to begin the
software update.
7. The following window will appear
to indicate the software upgrade
progress.
Note: The software upgrade consists
of two stages. Each stage needs
to be completed from 1 to 100%.
Do not pull the power and wait for
both stages to be completed.
8. The following window will appear to
indicate that the software upgrade
has completed. Remove the Ethernet
cable and press the Power button to
boot Contour up with the new version
of software.
Note: If you carried out the software upgrade using the directly connected PC method, disconnect
your computer’s Ethernet cable from the port on the back of Contour and reconnect
Contour to your network using either the wired or wireless connection method after the
software upgrade has completed.