Pure Digital Pure Contour Air 200i - Manual (Page 4)

4
Getting started
Introduction
Contour 200i Air can be used in a number of different ways:
• As an AirPlay device for playing audio from iTunes on your computer or an iPod touch, iPhone
or iPad with AirPlay — via your wireless network. See “Network setup” on page 6.
• As a docking station for an iPod, iPhone or iPad. See page 13.
• As a speaker for an audio device connected via the Aux In connector. See page 14.
Note: Contour 200i Air will be referred to as Contour throughout the rest of this user guide.
Standby
Press to switch between Sleep, Standby and On.
See page 6.
Source Press to switch between AirPlay, Dock and Auxiliary
input sources.
Shuffle the track playback order (when AirPlay/
Dock is the input source).
Toggle to repeat current track , repeat all or no
repeat (when AirPlay/Dock is the input source).
Vol
Menu
Press to access the menu on a docked iPod or
iPhone. Also steps back through menus.
< Select > Select tracks and menu options on your iPod/
iPhone (only when Dock is the input source).
and Skip to beginning of current track or go to previous
or next track. Hold to fast rewind or fast forward.*
Play/pause current track
Volume up/Volume down
+
-
*The remote control cannot be used to scan within a track when AirPlay is the input source
Remote control
Pull the plastic tab from the remote
control battery compartment and
remove the protective film from remote
buttons.