Panasonic EB-GD95 - Manual (Page 14)

Caller Identification
This feature allows you to identify incoming calls and accept or reject
them. The caller’s phone number, and name if stored in Phonebook,
will be displayed.
Note: Caller Identification may not always be available.
Earpiece Volume Control
The volume level may be adjusted during a call:
Use a to decrease the volume
Use b to increase the volume
Volume control for Personal Handsfree accessory is adjusted in the
same manner.
Locking the Phone
With the Phone Lock enabled you will be restricted to answer
incoming calls and make emergency calls only. The Phone Lock
Code is factory set to “0000”.
1 From Idle mode press Q, select Phone Menu
> Security > Phone Lock and press Q
2 Enter the 4-digit code and press Q
The phone will be locked and the lock icon (O) will
be displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code and press Q.
The lock icon will be removed from the display. However, once you
turn the phone off and on again you will need to re-enter the Lock
Code, and when the correct code has been entered Ok will be
displayed. Press Q.
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1 From Idle mode press Q, select Phone Menu > Security >
Phone Lock and press Q
2 Select Disable press Q
3 Enter the 4-digit code and press Q
10
Basic Operation