Panasonic EB-GD95 - Manual (Page 36)

The default setting for delivery confirmation can be enabled/disabled
using the Report parameter in the Short Message > Parameters
menu.
Receiving Text Messages
When a Short Text Message is sent to your phone the message
indicator (N) will flash in the display, with an audible tone or
vibration. This indicates that a new message has been received.
When
Read is displayed press Q to read the message. Use g to
navigate through the message and to identify the sender of the
message.
Note: If the message indicator is displayed constantly (does not
flash) this indicates that the message area is full and you will need
to delete old messages in order to be able to receive new messages
in the future.
Message Options
Reply to a Message
When you have received and read a message you may wish to reply
to the sender.
Pressing Q twice will allow you to create a reply message
Delete a Message
1 Press Q
2 Use e to select Delete and press Q to delete the message
To enable the auto-deletion of messages - see “Message
Parameters” page 33.
Edit a Message
1 Press Q
2 Use e to select Edit and press Q to edit the message
Pressing Q twice will give you the option to send the edited
message - see “Sending a Short Text Message” page 31. Press B
if you do not wish to send the message and it will be stored in the
Send List.
32
Short Text Messages