Panasonic EB-GD95 - Manual (Page 42)

Setting the Maximum Unit Level
This function is SIM dependent
1 From Idle mode press Q, select Phone Menu > Call Service
> Service Charges > Max Cost and press Q
2 Press Q twice to edit the values
At this point you will be asked to enter your PIN2 or lock code then
press Q.
3 Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost will be displayed
4 Press Q twice to accept
Note: The duration of one unit may vary during the day, peak and
off-peak times. Therefore, the call charge can be calculated
accordingly. However, call charge information may not give an
accurate reflection of the tariffs charged by your Service Provider.
Setting a Warning Level
A warning can be set as an indication that the maximum cost is
about to be reached. This function is SIM dependent.
1 From Idle mode press Q, select Phone Menu > Call Service
> Service Charges > Warning at and press Q
2 Press Q twice to edit the value
3 Enter a value (in units) at which time you would like the
warning to sound and press Q twice
Call Identification
In the Call Service menu, the Caller’s ID and Withhold ID functions
allow you to check the status of whether a Caller’s Identification is
sent or can be received. (Withhold ID is Network Dependent)
Note: When checking the status the phone must be registered with
a network.
38
Call Information