Panasonic EB-GD95 - Manual (Page 29)

Restricting Calls
Call Barring
The Call Bar function is used to restrict certain outgoing and/or
incoming calls. Call Bar is controlled by a security password that is
supplied by your Service Provider. When updating or checking the
status of Call Bar the phone must be registered with a network.
Different Call Bar restrictions can be used for voice, fax and data
calls. Any combination of call restrictions can be set.
1 From Idle mode press Q, select Phone Menu > Security >
Call Bar and press Q
2 Use e to select Bar Voice, Bar Fax or Bar Data and press Q
twice
3 Use e to the select level of call barring that you wish to apply
and press Q
4 Enter Call Bar password and press Q
Barred Dialling
The Barred Dial function enables you to bar all phone numbers
pre-programmed in the SIM from being dialled on the phone. To use
this function PIN2 is required.
1 From Idle mode press Q, select Phone Menu > Security >
Barred Dial and press Q
2 Enter PIN2 and press Q
Fixed Dial
The Fixed Dial Store is part of Phonebook, but with additional
security. When the security feature Fixed Dial is enabled it is only
possible to make calls with phone numbers that are in the Fixed Dial
Store.
When Fixed Dial is enabled any manually dialled phone numbers
must match a phone number in the Fixed Dial Store.
To store, edit or delete a phone number in the Fixed Dial Store the
Fixed Dial function must be enabled. With Fixed Dial enabled, all
phone numbers can be added, edited or deleted as normal, but you
will be prompted for PIN2.
25
Phone Security