Panasonic EB-GD95 - Manual (Page 63)

When the call is successful DTMF tones will be sent after 3 seconds
or when D is pressed.
If the DTMF tones are unsuccessful then the destination of your call
may require that the length of the tones be increased.
5 From Idle mode press Q, select Personalise > DTMF Length
and press Q
6 Use e to select Long and press Q
Note Pad
During a call you can enter numbers which you may wish to dial
when the call has ended.
During a call:
1 Enter phone number
2 When the call has ended press D to call that number
To store in Phonebook, press A while the number is displayed –
see “Store a Number” page 12.
Second Clock
The Second Clock can either be set to auto-adjusting, whereby the
second time will be automatically set from the code of the current
network, or a specified time difference can be set manually.
Setting Clock Display
1 From Idle mode press Q, select Applications > Clock
Function > Clock Format > Display Pattern and press Q
2 Use e to select either Second Time or Home Time and press
Q
Setting Auto Adjustment
If you travel to a country / region which has a roaming agreement
with your home network, your Second Clock will be automatically
adjusted. However, for countries / regions which have several time
zones in the same area manual adjustment is required.
1 From Idle mode press Q, select Applications > Clock
Function > Clock Set > Second > Auto Adjustment >
Home area and press Q
2 Use e to select your home area and press Q
59
Additional Features