Psion Teklogix netpad Win CE 4.1 - Manual (Page 103)

Psion Teklogix netpad Win CE 4.1 User Manual 83
Chapter 7: Configuring Communications
Setting Up E-mail On netpad
7.4.3.3 Setting Up The Internet Service
To set up a new dial-up connection:
1. Open the Control Panel.
2. Open the Dial Up Networking icon.
3. Double-click on the Make New Connection icon.
4. Enter the name for the dial-up connection, usually the name of the ISP.
The radio button should be next to Dial-Up Connection. Click Next.
7.4.3.4 Setting Up The Modem
After you have named your connection, you will set and configure your mode.
5. From the dropdown, select the correct modem.
6. Click on Configure to open the modem properties. The default settings
for the modem should only be changed if the modem manufacturer’s
instructions indicate such.
7. After selecting and configuring a modem, click Next to continue to the
Phone Number screen. Set the phone number. Click Finish.
8. The Dial-Up Networking screen should show your new connection
with the dial-up icon.