Psion Teklogix netpad Win CE 4.1 - Manual (Page 51)

Psion Teklogix netpad Win CE 4.1 User Manual 31
Chapter 3: Docking Station
Using The Docking Station
3.1 Using The Docking Station
This chapter describes the docking station. The docking station is used as a conve-
nient “drop-in” holder for the netpad, supplying power and communications through
the docking station connector.
3.1.1 Docking Station
The netpad docking station provides a permanently connected holder for the netpad.
The power jack is on the front and the serial communication sockets are situated at
the right of the docking station. The connector to the netpad faces upwards from the
middle of the station. This connector mates with the connector on the underside of
the netpad, and provides both power and serial communications.
Place the netpad in the docking station and it will begin charging.
Figure 3.1 Docking Station Features
To insert the netpad into the docking station, align the two devices, and press down
on the netpad until the connection is made. To eject, press down on the release
button at the top of the docking station. The netpad will be pushed up and out of the
docking station.
netpad Connectors Communication Ports
Power Jack
IR Ports
Release Button
Yellow LED indicates
communications
Red LED indicates charging/
Green LED indicates charged
Red LED indicates power