Panasonic AJ-D850P - Manual (Page 61)

– 61 –
USER menu
<OPERATION> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
115 STOP 0000 NORMAL
RESPNS 0001 QUICK
116 EE MODE 0000 NORMAL
SEL 0001 THRU
117 FRZ MODE 0000 DIS
SEL 0001 STBOFF
0002 SOF&EJ
The underline on the setting item denotes the initial setting.
This selects the response when the mode is changed to
STOP/STILL while the tape is traveling.
0: Priority is given to the output picture.
1: Priority is given to the response.
<Notes>
• At the 1 (QUICK) setting, the picture may not be as clear in
the STOP/STILL mode as it would be at the 0 (NORMAL)
setting.
• CTL may shift by ±2 frames.
This selects the output signals in the EE mode.
0: Signals which are delayed by an amount equivalent to the
time taken for the internal digital signal processing are
output.
1: The signals are output without internal digital signal
processing.
<Notes>
• The NORMAL setting is forcibly selected for the internal
operation when the editing mode is selected, when SDTI is
set as the video input signal selection or when INT SG is
selected for the video or audio signals.
• Use the signals which are output in the EE mode for moni-
toring purposes.
This selects the output pictures from the playback pictures in
the STANDBY OFF mode and EJECT mode.
0: The video output is muted.
1: The playback picture is frozen at the moment when the
STANDBY OFF mode was established, and output.
2: The playback picture is frozen at the moment when the
STANDBY OFF mode and EJECT mode were established,
and output.
<Notes>
• The status in the freeze mode follows the setting for setup
menu No. 608 (FREEZE SEL).
• In the EJECT mode, freeze pictures are output only when 2
(BLACK) is used as the setup menu No. 105 (AUTO EE
SEL) setting.