Panasonic DX-600 - Manual (Page 154)

154
Subject Line Entry
Your machine will automatically add the Default Subject information that was entered during the User
Parameter setup, to the Subject Line of all outgoing emails.
If you would like for the machine to prompt you for the Subject before each email transmission, change the
Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
General Description
Sending Email with Subject Line Entry
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Enter the email addresses by any combination of the
following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press
after each
email address is entered.
• Manual Number Dialling, press after each
station is entered (up to 70 addresses).
Ex:
<01>(Station name)
[email protected]❚
3
ENTER SUBJECT OR
PRESS START TO SEND
4
Enter the Subject (max. 40 characters and digits) by using
the Character keys. (See page 14) To use the Default
Subject pre-programmed in the User Parameter, just
press .
Ex: FAX from Mr. Jones
SUBJECT
FAX from Mr. Jones
SET
SET
START