Panasonic DX-600 - Manual (Page 72)

Programming Email Address and Telephone Numbers
72
Programming the Auto Dialler
NOTE 1. If you require a special access number to get an outside line, enter it first and then press
. A hyphen "-" is displayed for pause.
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a "/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
3. If you enter the Station name with the Fax Parameter 172 (DIRECT IFAX XMT) set to "Valid,"
you are allowed to select the usage of Direct IFAX XMT.
8
To record another number, repeat Steps 4 to 8.
To return to standby, press
.
ABBR[❚ ]
ENTER ABBR NO.
STOP
PAUSE