05 listening to your system, Listening in surround sound, Listening to your system – Pioneer VSX-D514 User Manual
Page 36: Listening to your system 05, Chapter 5
Listening to your system
05
36
En
Chapter 5:
Listening to your system
Listening in surround sound
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you’re listening
to.
If you connected surround back speakers, see
also
Using the Surround Back Channel (SB
CH)
on page 39.
•
While listening to a source, press
STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
With two channel sources
, press
STANDARD
repeatedly to select from:
VSX-D514 only:
•
2
Pro Logic II MOVIE
– Up to 5.1 channel
sound, especially suited to movie sources
•
2
Pro Logic II MUSIC
– Up to 5.1 channel
sound, especially suited to music sources
•
2
PRO LOGIC
– 5.1 channel surround
sound
VSX-D714/D814 only:
•
2
Pro Logic IIx MOVIE
– Up to 6.1
channel sound, especially suited to movie
sources
•
2
Pro Logic IIx MUSIC
– Up to 6.1
channel sound, especially suited to music
sources
•
2
PRO LOGIC
– 5.1 channel surround
sound
•
NEO:6 CINEMA
– 6.1 channel sound,
especially suited to movie sources
•
NEO:6 MUSIC
– 6.1 channel sound, espe-
cially suited to music sources
• You can’t use the
STANDARD
mode with
96kHz PCM or (
VSX-D714/D814 only)
DTS
96kHz/24-bit stereo sources.
•
VSX-D714/D814 only –
During playback of
a Dolby Digital multichannel source with
the
SB CH MODE
switched
ON
, you will
only be able to select
DOLBY EX
or
2
Pro Logic IIx MUSIC
. See
Using the
Surround Back Channel (SB CH)
on
page 39 for more on this.
STANDARD
VSX_514-814.fm 36 ページ ２００４年３月２日 火曜日 午後８時３５分