Pioneer VSX-D514 - Manual (Page 58)

Using the tuner 07
58
En
3 Press CLASS to select one of the three
classes then press ST +/– (STATION +/–) to
select the station preset you want.
You can also use the MULTI JOG dial (front
panel) to select a station preset.
4 Press ENTER.
After pressing ENTER , the preset class and
number stop blinking and the receiver stores
the station.
Naming station presets
For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See Listening to station presets below for how
to do this.
2 Press T.EDIT (TUNER EDIT).
The display shows ST. NAME , then a blinking
cursor at the first character position.
3 Input the name you want.
Names can be up to four characters long.
• Use the MULTI JOG dial (front panel) or
the ST +/– buttons (remote) to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth
character.
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset,
you can press DISPLAY when listening to
a station to switch the display between
the name and the frequency.
Listening to station presets
You will need to have some presets stored to
do this. See
Saving station presets on page 57
if you haven’t done this already.
1 Press TUNER to select the tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A,
B and C.
3 Press ST +/– (STATION +/–) to select
the station preset you want.
• If the receiver is left disconnected from
the AC power outlet for an extended
period, the station memories will be lost
and will have to be reprogrammed.
Changing the frequency step
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how
to switch the setting:
1 Switch the receiver into standby.
2 On the front panel, press STANDBY/
ON while you press and hold the BAND
(VSX-D714/D814) / CLASS (VSX-D514)
button.
The channel tuning step alternates between
FM 100 kHz/AM 10kHz and FM 50 kHz/AM
9 kHz each time you do this.
VSX_514-814.fm 58 ページ ２００４年３月２日 火曜日 午後８時３５分