Pioneer CLD-V2800 - Manual (Page 36)

Explanation: If this command is sent to the player when it is in Random Access
Mode, playback stops at that position and Still Mode occurs.
Execution: * Play Mode
S T <C/R>
R <C/R>
* Still Mode
P L <C/R>
R <C/R>
* Play Mode
8) STEP FORWARD LD (CAV Only)
9) STEP REVERSE LD (CAV Only)
Function: Pictures are moved one frame forward or reverse.
Format: S F - STEP FORWARD
S R - STEP REVERSE
Explanation: If this command is sent to the player when it is in Random Access
Mode, the pictures will move one frame forward or reverse, and
then Still Mode occurs.
Execution: * Play Mode
S F <C/R>
R <C/R>
* Still Mode
S R S R S R <C/R>
R <C/R>
* Still Mode
CLD-V2800 Level III • Chapter Three
Integer
†
Possible range Speed Integer
†
Possible range Speed
of integers of integers
180 150-255 X3 15 12-22 1/4
120 91-149 X2 7 6-11 1/8
60 46-90 X1 4 3-5 1/16
30 23-45 1/2 2 0-2 Step 1**
Figure 3-H
CLD-V2800 Level III User’s Manual TP 120 v. 1.0 • 10/95 3-17
** NOTE: 2SP plays one frame every second (Step 1) on the CLD-V2800/2600/2400.
Similarly, 2SP sets a Step 1 to play one frame every second on the Pioneer LD-V2200,
LD-V4400 and LD-V8000. Early versions of the CLD-V2400 played 1 frame every
three seconds (Step 3) if a 0SP or 1SP were sent to the player. Later production units
of the CLD-V2400, however, all play Step 1 if a 0SP, 1SP or 2SP is sent to the player.
To achieve compatibility across the player line for a one frame per second playback
speed, send the 2 SP command, followed by MF (Multi-Speed Forward).