Pioneer CLD-V2800 - Manual (Page 41)

19) TIME SET LD (CLV Only) & CD
Function: Address flag is set to “time.”
Format: T M
Explanation: If this command is sent when a CLV LaserDisc or a CD is being
played, the address flag is set to “time,” and the subsequent
addresses to be handled are evaluated as time numbers. Time
number searches on CLV LaserDiscs includes hours, minutes and
seconds up to a maximum number of 95959 (9 hrs. 59 min. 59 sec.).
CLV videodiscs contain a maximum capacity of one-hour of playing
time on a single side of a disc. Time numbers may be encoded,
however, in running succession disc-side to disc-side. If a CAV disc is
playing and this command is sent to the player, an error message,
E04, will be returned.
Time number searches on CDs include minutes and seconds up to a
maximum number of 9959 (99 min. 59 sec.). CDs contain a
maximum capacity of 74 minutes of playing time on a single side.
Execution#1: * CLV Disc, Play Mode
(LDs) T M 1 2 4 1 6 S E<C/R> R <C/R>
* Search 1 Hr. 24 Min. 16 Sec.
Execution#2: * CD, Play Mode
(CDs) T M 1 2 4 1 S E<C/R> R <C/R>
* Search 12 Min. 41 Sec.
20) TRACK SET CD
Function: Address flag is set to “track.”
Format: TR
Explanation: If this command is given, the address flag is set to “track”. When a
CD is playing, the subsequent addresses to be handled are evaluated
as track numbers (01-99). If this command is sent while a LaserDisc
is playing, an error message, E04, will be returned.
Execution: * Address flag = Time, a CD is playing
TR <C/R>
R <C/R>
* Address flag = track
1 5 S E <C/R>
R <C/R>
* Search to Track 15
Chapter Three • CLD-V2800 Level III
3-22 TP 120 v. 1.0 • 10/95 CLD-V2800 Level III User’s Manual