Pioneer CLD-V2800 - Manual (Page 65)

Chapter Three • CLD-V2800 Level III
3-46 TP 120 v. 1.0 • 10/95 CLD-V2800 Level III User’s Manual
3.7.8 New Command
53) PICTURE STOP LD (CAV only)
Function: Enables or disables picture stops encoded on a LaserDisc.
Format: Integer PS
Explanation: The default is picture stops enabled 0PS. By sending 1PS,
however, picture stops can be disabled or over-ridden so the disc
can be played through without interruption.
Execution: * Picture Stops are enabled
1PS <C/R>
* Picture Stops are disabled and the player plays the video
material without holding a still frame at the picture stops. <C/R>
0PS <C/R>
* Picture Stops are enabled and player stops at the picture stops
encoded on a CAV disc until another motion command is sent to
the player.
Note: Picture stops are encoded on CAV discs only, by request.
Picture stops cannot be encoded on CLV discs.