Panasonic AG-AC160AEN - Manual (Page 35)

35
Shooting
Native recording
1
Select the recording format [PH 1080/24P] *1
in the [REC FORMAT] item on the setup
menu [RECORDING SETUP] screen (Page 89).
2
Turn the [VFR MODE] item on the setup
menu [SCENE FILE] screen [ON], and set an
optional recording frame rate in the [FRAME
RATE] item (Page 83).
3
Press the <START/STOP> button.
Native recording starts in VFR mode.
• When VFR mode is set, the audio cannot
be recorded. [ ] will be displayed on the
screen and the audio level meter will not be
displayed. After recording starts, [VFR ON =
NO AUDIO RECORDING] is displayed for five
seconds. Audio is not output from the external
output terminals.
• If lower frame rate (12P or lower) is set,
accessing the memory card after recording
takes longer. Before ejecting a memory card,
confirm that the memory card access lamp is
not flashing.
Standard recording
1
Select the recording format [PH 1080/30P] *1
or [PH 1080/25P] *2 in the [REC FORMAT] item
on the setup menu [RECORDING SETUP]
screen (Page 89).
2
Turn the [VFR MODE] item on the setup
menu [SCENE FILE] screen [ON], and set an
optional recording frame rate in the [FRAME
RATE] item (Page 83).
3
Press the <START/STOP> button.
Standard recording starts in VFR mode.
• When VFR mode is set, the audio cannot
be recorded. [ ] will be displayed on the
screen and the audio level meter will not be
displayed. After recording starts, [VFR ON =
NO AUDIO RECORDING] is displayed for five
seconds. Audio is not output from the external
output terminals.
• 2:2 pull down recording will be applied for a
recording frame rate of 30P or 25P.
• If lower frame rate (12P or lower) is set,
accessing the memory card after recording
takes longer. Before ejecting a memory card,
confirm that the memory card access lamp is
not flashing.
*1 When [SYSTEM FREQ] = [59.94Hz]
*2 When [SYSTEM FREQ] = [50Hz]