Using the viewfinder, Shooting – Panasonic AG-AC160AEN User Manual

Page 5

Advertising
background image

5

Shooting

Using the viewfinder

This camera utilizes a viewfinder with a miniature
LCD, and a 3.45-inch LCD monitor.
Use them according to application and shooting
conditions.

Brightness and hue of images in the viewfinder
and the LCD monitor may sometimes differ from
those on a TV monitor.
Check final images with a TV monitor.

Using the viewfinder

1

Turn the POWER/MODE switch of the

camera <ON> (Page 30 of Vol.1), and check

that images appear in the viewfinder.

2

Position the screen of the viewfinder where

it is easiest to see.

The viewfinder can be raised to about 90°
perpendicular to the camera.

3

Adjust the diopter adjustment dial so that

you can see the characters on the finder

screen clearly.

Diopter adjustment dial

Viewfinder

Do not leave the eyepiece of the viewfinder

pointed in the direction of the sun or strong

light sources.

Internal components may be damaged or fire
may be caused if light is focused through the
lens.

• When the LCD monitor is open, the viewfinder

may not display anything. Close the LCD
monitor. (Page 70)

• Less than 0.01% of the pixels in the LCD may

not light or remain on all the time. They are
not defective, and will have no effect on the
images you record.

• Screen burn-in may occur in the LCD monitor,

however, this is not a defect.

Shooting

Advertising
This manual is related to the following products: