Panasonic AG-AC160AEN - Manual (Page 52)

52
4
When the following screen appears, set the
time code value.
Tilt the OPERATION lever in the < >< >
directions to select the time code value.
Tilt the OPERATION lever in the < > direction
to move to the next digit, and tilt in the < >< >
directions again to select the value.
• You can reset the time code value to zero by
pressing the <RESET/TC SET> button while
setting the time code.
Camera
5
When finished setting the time code value,
push the OPERATION lever.
6
Tilt the OPERATION lever in the < >
direction to move to [YES], and push the
OPERATION lever.
This camera adjusts the time code value in
accordance with the format and frame rate. For this
reason, bear in mind that making a change in the
format or frame rate may result in discontinuity from
the last time code value of the previous recording.
Adjustments are made in increments in the
following table when the recording format is 24P.
Recording format Time code adjustment
1080/24P
720/24P
4-frame increments
480/24P 5-frame increments