Thumbnail screen, Basic thumbnail screen operations – Panasonic AG-AC160AEN User Manual
Page 55
55
Playback
Thumbnail screen
Video data created in one shooting session is called a clip. When the <PB> mode has been established,
the clips will be displayed on the LCD monitor as thumbnails. (When there is a large number of clips, it will
take some time for them to be displayed on the screen.)
You can perform the following operations using the thumbnail screen.
•
Play and delete clips
•
Format memory card
•
Protect clips, and add or delete index (only in AVCHD mode)
•
Add or delete shot mark
•
Clips recorded in AVCHD mode will not be displayed in thumbnails in DV mode. Also, clips recorded in
DV mode will not be displayed in thumbnails in AVCHD mode.
•
When two memory cards containing clips are inserted in both memory card slots, clips in the memory
card in the selected slot will be displayed in thumbnails. To display the thumbnails of clips in another
memory card, switch the slot for playback. (Page 57)
•
If a memory card includes more than 1000 clips, thumbnails exceeding 1000 will not be displayed.
•
To display clip information, select a clip and press the <DISP/MODE CHK> button.
Basic thumbnail screen operations
To select thumbnail:
Tilt the OPERATION lever in the < >< >< >< > directions to select
thumbnail. (Orange frame moves)
To play back clips:
Select the thumbnail, and push the OPERATION lever. (For details on
playback, see page 54.)
To change the slot for playback:
Press the <SLOT SEL> button to select the slot.
In AVCHD mode
1
5
6 7 8
2
3
4
9
10
11
12