Pitney Bowes N921 - Manual (Page 11)

Page 11
Installation Instructions
N900
series install
Use these instructions if you have a N921,
35kg scale
The scale looks like this:
Note: The weighing platform
and control module are
separate units connected by
a single cable.
1. Make sure you have:
✓ Scale control module and platform
✓ Power Supply Unit (in its own box)
✓ User Guide
✓ Rate PROM
✓ Meter Cable (only if you ordered a Pitney Bowes
Postage Meter at the same time as your scale)
Weighing
platform
2. Locate and level the weighing
platform
Place the platform within cable reach of the Control
Module. Ensure the platform location is a flat, stable
surface, free of draughts and the platform is not
touching objects that may affect the weight reading.
Lift the cover straight up from the platform unit. Level
the platform by turning its feet until the levelling bubble
is centred and the platform doesn’t wobble.
Control
module
✘ ✔
Power Supply
Unit
User Guide Meter Cable Rate PROM