Pitney Bowes N921 - Manual (Page 15)

Page 15
Installation Instructions
N900
series install
12.Enter your scale
location code
Note: Your scale will not work
unless you perform this step.
a. Find the location code
corresponding to your
location on the map.
b. Enter the code via the
numeric keys.
c. Ensure that the code on
the display matches
your location code.
d. Press Enter.
13.The scale is now ‘ready’
After entry of the location code, the scale goes
through a short test sequence, then displays 0g
and the Select Category message. This is the
ready mode.
If your postage meter has an optional Datalink
unit fitted, configure it now as described in the
Datalink Operating Guide.
Congratulations!
You have successfully installed your Pitney Bowes Scale.
For information on using the scale, refer to the Operating Guide.
If you have existing Pitney Bowes equipment that needs to be returned, follow the
instructions included in your ‘Information Pack’ now.