Pitney Bowes N921 - Manual (Page 5)

Page 5
Installation Instructions
N421
install
11.Enter your scale
location code
Note: Your scale will not work
unless you perform this step.
a. Find the location code
corresponding to your
location on the map.
b. Enter the code via the
numeric keys.
c. Ensure that the code on
the display matches
your location code.
d. Press Enter.
12.The scale is now ‘ready’
After entry of the location code, the scale goes through
a short test sequence, then displays 0000g and the
Select Category arrow flashes. This is the ready mode.
If your postage meter has an optional Datalink unit
fitted, configure it now as described in the Datalink
Operating Guide.
Scale ready mode
Select
Category
Select
Zone
Select
Fees
Zone Piece
Count
Error
Congratulations!
You have successfully installed your Pitney Bowes Scale.
For information on using the scale, refer to the Operating Guide.
If you have existing Pitney Bowes equipment that needs to be returned, follow the
instructions included in your ‘Information Pack’ now.