2 wall mount plate mounting – Planet Technology ISW-800M User Manual
Page 15
Advertising
Step2:
Lightly push the button of DIN-Rail into the track.
Step3:
Check the DIN-Rail is tightly on the track.
Step4:
To remove the industrial switch from the track, reverse steps above.
2.2.2 Wall Mount Plate Mounting
To install the switch on the wall, please follows the instructions described below.
Step1:
Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
Step2:
Place the wall mount plate on the rear panel of the industrial switch.
Advertising