7 port control – Planet Technology ISW-800M User Manual
Page 24
to clean all counts.
Port Statistics Interface
4.7 Port Control
You can change the port status.
1.
Select the port by scroll the Port column.
2.
State: disable or enable control of his port.
3.
Negotiation: you can set auto negotiation mode is Auto, Nway (specify the speed/duplex on this
port and enable auto-negotiation), or Force.
4.
Speed: set the speed of the port.
5.
Duplex: set full-duplex or half-duplex mode of the port.
6.
Flow control: set flow control function is ON or OFF in Full Duplex mode.
7. Click
button to apply all configuration.
8.
When you select the port, you can see port current configure shows in below column.
[NOTE]
Remember to execute the "Save Configuration" action, otherwise the new configuration will lose
when the switch power off.