Planet Technology ISW-800M - Manual (Page 33)

user. You can set up the mail server IP, mail account, and forwarded email account for receiving the event
alert.
1. Email Alert: enable or disable the email alert function.
2. SMTP Server IP Address: set up the mail server IP address.
3. Authentication: mark the check box to enable and configure the email account and password for
authentication.
Mail Account: set up the email account to receive the alert. Ex: [email protected]. The
email account must exist on the mail server, which you had set up in SMTP Server IP Address
column.
Password: The email account password.
Confirm Password: reconfirm the password.
4. E-mail Address of Receipient 1 ~ 4: you can assign up to 4 e-mail accounts also to receive the
alert.
5. Click .
E-mail Alert Configuration
4.11.2 Event Configuration
The selected events that occur will send out the alert to the assigned SMTP server. Also, you can select
port events for alerting.
System event selection: 4 selections - Device cold start, Power status, SNMP Authentication Failure,
and Redundant ring topology changes. Mark the checkbox to select the event. When selected events
occur, the system will sent out the alerting.
¾ Device cold start: when the device executes cold start action, the system will send out the