9 port mirroring – Planet Technology ISW-800M User Manual
Page 26
Switch Settings interface
[NOTE]
Remember to execute the "Save Configuration" action, otherwise the new configuration will lose
when the switch power off.
4.9 Port Mirroring
The Port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be
monitored by one specific port. That is, traffic goes in or out monitored ports will be duplicated into mirror
port.
1.
Port Mirroring Mode:
set mirror mode -- Disable, TX, and Both. The default is "Disable".
2.
Analysis Port:
It's mean mirror port can be used to see all monitor port traffic. You can connect
mirror port to LAN analyzer or Netxray.
3.
Monitor Port:
the ports you want to monitor. All monitor port traffic will be copied to mirror port. You
can select max 7 monitor ports in the switch. User can choose which port want to monitor in only
one mirror mode.
[NOTE]
1.
If you want to disable the function, select the monitor mode as disable.
2.
Remember to execute the "Save Configuration" action, otherwise the new configuration will lose
when the switch power off.