3 press [menu/set]. [date stamp – Panasonic DMC-FX30 User Manual
Page 74
Advanced (Playback)
74
VQT1C08
• The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
• When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
established by “JEITA (Japan Electronics
and Information Technology Industries
Association)”.
• Rotated pictures are displayed rotated
when they are played back in review
playback and playback zoom however are
displayed without being rotated when they
are played back in multi playback.
• It may not be possible to rotate pictures
that have been recorded with other
equipment.
Press [
] to display the [PLAY] mode
menu and select the item to set. (P70)
You can stamp the date and time of
recording, the age and the travel date on
the recorded pictures.
It is suitable for regular size printing.
(Pictures with a picture size larger than
[
] will be resized when stamping the
date etc. on them.)
Press
3/4 to select [SINGLE] or
[MULTI] and then press [MENU/
SET].
• The date information cannot be
stamped on the following pictures.
– Pictures recorded without setting the
clock
– Pictures recorded with other
equipment
– Pictures that were previously stamped
with [DATE STAMP]
– Motion pictures
– Pictures with Audio
∫ Single setting
1 Press
2/1 to select the picture
and then press
4.
2 Press
3/4/2/1 to select
[SHOOTING DATE], [AGE] or
[TRAVEL DATE] and then press
[MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P44)
If you set this to [ON], the age is stamped
on pictures taken when the age was set.
[TRAVEL DATE] (P51)
If you set this to [ON], the travel date is
stamped on pictures taken when the
travel date was set.
3 Press [MENU/SET].
[DATE STAMP]
Stamping information such as the
date on the recorded pictures
/SET
MENU
PLAY
1
/
3
ON
OFF
SET
MENU
FAVORITE
ROTATE DISP.
ROTATE
SLIDE SHOW
SELECT
DATE STAMP
SINGLE
MULTI
/SET
MENU
[W/O TIME]
Stamp the year, month
and date.
[WITH TIME] Stamp the year, month,
day, hour and minutes.
1/14
DATE
SELECT
SET
EXIT
MENU
STAMP
DATE STAMP
SET
SELECT
MENU
CANCEL
SHOOTING DATE
TRAVEL DATE
AGE
OFF
W/O TIME
OFF
/SET
MENU