Panasonic DMC-FX30 - Manual (Page 83)

Advanced (Playback)
83
VQT1C08
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)
• DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P76)
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P70)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
• If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
(P19) or the AC adaptor (DMW-AC5PP;
optional) when formatting.
• Do not turn the camera off during
formatting.
• It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch
A is set to [LOCK].
• If the card cannot be formatted, consult
your nearest servicentre.
[FORMAT]
Initializing the built-in memory or a
card
/SET
MENU
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
NO
YES
SELECT SET MENU /SET
MENU
2