About the battery – Panasonic DMC-FX30 User Manual

Page 9

Advertising
background image

Preparation

9

VQT1C08

3 Detach the battery after charging

is completed.

\

• After charging is completed, be sure to

disconnect the AC cable from the
electrical outlet.

• The battery becomes warm after using it

and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.

• The battery will be exhausted if left for a

long period of time after being charged.
Recharge the battery when it is exhausted.

• The battery can be charged even if it is

not fully discharged.

• Use the dedicated charger and battery.
• Charge the battery with the charger

indoors.

• Do not disassemble or modify the

charger.

About the Battery

(charging/number of recordable

pictures)

The battery life
The number of recordable pictures
(By CIPA standard in normal picture
mode [

])

Recording conditions by CIPA standard
• Temperature: 23 °C/

Humidity: 50% when LCD monitor is on.

¢

• Using a Panasonic SD Memory Card

(16 MB).

• Using the supplied battery.
• Starting recording 30 seconds after the

camera is turned on. (When the optical
image stabilizer function is set to [MODE1].)

Recording once every 30 seconds with

full flash every second recording.

• Rotating the zoom lever from Tele to Wide

or vice versa in every recording.

• Turning the camera off every

10 recordings and leaving it until the
temperature of the battery decreases.

¢ The number of recordable pictures

decreases when the power LCD
function or high angle mode (P31) are
used.

• CIPA is an abbreviation of

[Camera & Imaging Products
Association].

Number of
recordable pictures

Approx. 280 pictures
(Approx. 140 min)

The number of recordable pictures
varies depending on the recording
interval time.
If the recording interval time becomes
longer, the number of recordable
pictures decreases.
[e.g. When recording once every
2 minutes, the number of recordable
pictures decreases to about 70.]

Advertising