Viewfinder displays – Panasonic AG-DVC200 User Manual
Page 17
17
Displayed when the AWB has been attained for channel A.
Displayed when the AWB has been attained for channel A, and the color
temperature is lower than the display range.
Displayed when the AWB has been attained for channel A, and the color
temperature is higher than the display range.
Displayed when the AWB has been attained for channel B.
Displayed when the AWB has been attained for channel B, and the color
temperature is lower than the display range.
Displayed when the AWB has been attained for channel B, and the color
temperature is higher than the display range.
Displayed when AWB has been switched to PRE.
Displayed when AUTO KNEE has been changed from OFF to ON.
Displayed when AUTO KNEE has been changed from ON to OFF.
Displayed when the gain has been switched.
Displayed when the filter has been switched.
Displayed when the shutter has been set to OFF.
Displayed when the shutter has been set to ON.
Displayed when the IRIS MODE switch setting has been changed.
Displayed when FULL AUTO has been changed from OFF to ON.
Displayed when FULL AUTO has been changed from ON to OFF.
Displayed when the scene file dial setting has been switched.
Viewfinder displays
Display item
What is displayed
Status causing the display to appear
3
Time code display
TCG
12:59:59:29
TCR
12:59:59:29
UBG
AB:CD:EF:00
UBR
AB:CD:EF:00
CNT01:59:59
Indicates the TCG (time code generator) value.
Indicates the TCR (time code reader) value.
Indicates the UBG (user’s bit generator) value.
Indicates the UBR (user’s bit reader) value.
Indicates the COUNTER (counter) value.
1
Extender display
EX
Displayed when the lens extender is being used.
4
Center marker
+
Displayed when ON is selected as the CENTER MARK setting (see page
35). It indicates the center of the viewfinder screen.
2
INTERVAL REC
status display
iREC
Indicates the interval recording mode. For further details, refer to
“INTERVAL REC function” (page 28).
5
1st line message
display (changes in
switch settings)
AWB Ach
¢
.
¢
K
AWB Ach
¢
.
¢
K UNDER
AWB Ach
¢
.
¢
K OVER
AWB Bch
¢
.
¢
K
AWB Bch
¢
.
¢
K UNDER
AWB Bch
¢
.
¢
K OVER
AWB PRE
¢
.
¢
K
AUTO KNEE ON
AUTO KNEE OFF
GAIN
¢¢
dB
FILTER
¢
SHUTTER OFF
SHUTTER 1/
¢¢¢¢
IRIS MODE
¢¢¢¢
FULL AUTO ON
FULL AUTO OFF
SCENE FILE USER
SCENE FILE 1
SCENE FILE 2
SCENE FILE 3
SCENE FILE 4
SCENE FILE STD
(AWB, ABB operation
displays)
AWB ACTIVE
AWB OK
¢
.
¢
K
AWB OK
¢
.
¢
K UNDER
AWB OK
¢
.
¢
K OVER
AWB NG
AWB PRE
ATW MODE
ABB ACTIVE
ABB OK
ABB NG
Displayed while the AWB operation is in progress.
Displayed when AWB is completed error-free.
Displayed when AWB is completed error-free, and the color temperature is
outside the display range (under
¢
.
¢
K).
Displayed when AWB is completed error-free, and the color temperature is
outside the display range (over
¢
.
¢
K).
Displayed when AWB is completed with an error.
Displayed when AWB cannot be performed because AWB is set to PRE.
Displayed when ATW (full time auto white balance) is in progress.
Displayed while the ABB operation is in progress.
Displayed when ABB is completed error-free.
Displayed when ABB is completed with an error.
5
2nd line message
display
(error result message
displayed after AWB
or ABB has been
performed)
color temp LOW
color temp HIGH
LEVEL OVER
LOW LIGHT
UNSTABLE CONDITION
TIME OVER
Warns that the color temperature is too low during the AWB operation.
Warns that the color temperature is too high during the AWB operation.
Warns that the brightness is too high during the AWB operation.
Warns that the brightness is too low during the AWB operation.
Warns that the screen is not stable during the AWB or ABB operation.
Warns that the AWB or ABB processing could not be completed within the
allotted time.
6
IRIS MODE switch
status display
SPOT
BACK
Displayed when the IRIS MODE switch is at the SPOT.L position.
Displayed when the IRIS MODE switch is at the BACK.L position.
7
QUICK FOCUS
display
QUICK FOCUS
Displayed when QUICK FOCUS is ON.