Panasonic AG-DVC200 - Manual (Page 29)

29
Using the unit with external components
Connection to a PC capable of non-linear editing
By connecting the unit to a PC capable of non-linear editing using a DV cable, the unit can be controlled from the PC and pictures and sound
can be input from or output to the PC.
Select 1394 as both the REMOTE SELECT and INPUT SELECT settings on the sub-menu VIDEO IN/OUT screen. Refer to the figure below
for the connections. (See page 34)
DV/IF connector
DV cable
PC
AG-DVC200
To DV
connector
Connection to a video component with a DV connector
The unit can be used as a player or recorder by connecting it to a video component equipped with a DV connector using a DV cable. In
either case, refer to the figure below for the connections.
Using the unit as a player
Select 1394 as the REMOTE SELECT setting on the sub-menu VIDEO IN/OUT screen. (See page 34)
The unit can now be controlled from the external video component with the DV connector.
Using the unit as a recorder
Select 1394 as the INPUT SELECT setting on the sub-menu VIDEO IN/OUT screen. (See page 34)
The pictures and sound of the external video component with the DV connector can now be recorded on the unit.
DV/IF connector
DV cable
Video component with DV connector
AG-DVC200
To DV connector
<Note>
When the unit is connected by cable to an exterior device, set the VTR STBY/SAVE switch to STBY to improve response by the unit.