Panasonic AG-DVC200 - Manual (Page 32)

32
Menu contents
SCENE menu (main menu)
SCENE FILE
“ ” indicates the factory setting.
#NEXT¢¢¢¢ SCENE ¢¢¢¢
F1:FLUO.
SCENE FILE..
IRIS GAMMA..
COLOR/SKIN TONE..
PROCESS..
ADDTIONAL PROCESS..
Item
Setting
options
Remarks
NAME EDITUSER
F1 - F4
STD
For editing scene filenames.
For further details, refer to “Editing scene
filenames” (page 23).
IRIS/GAMMA
Item
Setting
options
Remarks
A. IRIS LEVEL –10
:
+00
:
+10
For setting the AUTO IRIS target value.
The brightness (IRIS) is controlled using
this value. The higher the setting, the
brighter the images shot.
WRITE For writing a scene filename.
INIT For returning the scene filenames to their
factory settings.
WRITE For saving the data.
WRITE For saving the data.
A. IRIS PEAK/AVE AVE
10
:
01
PEAK
00
:
10
For setting the ratio between the AUTO
IRIS peak value control and average value
control. With a setting of 10 for AVE,
control is exercised completely by the
average value; with a setting of 10 for
PEAK, control is exercised completely by
the peak value.
A. IRIS SPEED –2
:
+0
:
+2
For setting the AUTO IRIS speed.
BLACK
STR/PRESS PRESS
NORM
STR For selecting the low-brightness black rise.
PRESS: The black is compressed, and the
images appear tight.
NORM: Standard setting
STR:
The black is extended, and the
gradations in the dark areas are
expanded.
COLOR/SKIN TONE
Item
Setting
options
Remarks
PRE COLOR TEMP –30
:
+00
:
+30
For finely adjusting the color temperature
from the white balance when the WHITE
BAL switch is set to the PRE position.
This does not function with the ATW mode.
Ach –30
:
+00
:
+30
For finely adjusting the color temperature
from the white balance when the WHITE
BAL switch is set to the A position.
This does not function with the ATW mode.
Bch –30
:
+00
:
+30
For finely adjusting the color temperature
from the white balance when the WHITE
BAL switch is set to the B position.
This does not function with the ATW mode.
SKIN TONE DTL ON
OFF For setting the skin tone detail ON or OFF.
When the skin tone detail is set to ON, the
detail in the skin tone areas is reduced,
diminishing the feeling of roughness in the
skin.
<Note>
When ON has been set for SKIN TONE
DTL and the SKIN TONE RANGE or SKIN
TONE CORING menu item is being set, the
SKIN TONE ZEBRA pattern will appear for
10 seconds.
SKIN TONE
RANGE NORM
WIDE For setting the skin tone detail range.
NORM:Normal range
WIDE: Wide range
MASTER GAMMA –17
:
+00
:
+03
For setting the master gamma.