Panasonic AG-DVC200 - Manual (Page 24)

24
3< SCENE FILE >
NAME EDIT USER:TARO
--------
FILE NAME USER:FACTORY
F1:FLUO.
F2:SPARKLNG
F3:COOL
F4:RETRO
STD:FACTORY
# WRITE(USER) :NO
INIT (USER) :READY
Scene files
How to use file select
Returning a scene filename to
its default
Rotate the JOG dial button to move “ > ” to the INIT item, and
perform steps 10 and 11 of “Editing scene filenames” in the
previous section.
The scene filenames are returned to their defaults (factory settings).
<Note>
The scene file setting data are also returned to their default values.
1 To write the unit’s setting statuses in the file with the
selected number when it is selected, execute FILE WRITE
(
¢ ) (where the number of the selected file is input into “ ¢ ”).
2 To call the unit’s setting statuses from the file with the
selected number, execute FILE READ (
¢ ).
3 To return to the default statuses, execute READ FACTORY.
For details on this operation, refer to the scene file settings.
The setting menu is cleared, and the displays showing the
unit’s current statuses appear on the viewfinder screen.
When the data has been written (saved), the following
message is displayed.
2
Proceed with writing setting statuses in a
file or calling them from a file.
9
Rotate the JOG dial button to move “ > ” to
the WRITE item.
3< SCENE FILE >
NAME EDIT USER:TARO
--------
FILE NAME USER:FACTORY
F1:FLUO.
F2:SPARKLNG
F3:COOL
F4:RETRO
STD:FACTORY
# WRITE(USER) :READY
INIT (USER) :READY
10 When the JOG dial button is pressed, the
following message is displayed.
3< SCENE FILE >
NAME EDIT USER:TARO
--------
FILE NAME USER:TARO
F1:FLUO.
F2:SPARKLNG
F3:COOL
F4:RETRO
STD:FACTORY
# WRITE(USER) :OK
INIT (USER) :READY
11 Rotate the JOG dial button to select YES,
and press the JOG dial button.
<Note>
Repeat step 11 if the NG display appears.
12 Press the MENU button to exit the menu
operation.
Up to four menu setting parameters other than scene files can be
stored in the memory. These parameters are MAIN 1/2 and MAIN
2/2 menu items. For further details, refer to “List of file settings”
(page 25).
Files are written and read on the sub-menu <DATA READ/WRITE>
screen (page 33). When the unit was shipped from the factory, the
default values (factory settings) were stored in four files.
Proceed with the menu operations (page 30) to display the sub-
menu <DATA READ/WRITE> screen.
1
Operate the JOG dial button to select 1, 2,
3 or 4 as the FILE SELECT number.
3< DATA READ/WRITE >
# FILE SELECT :1
FILE READ (1):READY
FILE WRITE(1):READY
READ FACTORY :READY