Panasonic AG-DVC200 - Manual (Page 33)

33
MAIN menu 1 of 2 (main menu)
#NEXT¢¢¢¢ MAIN 1/2 ¢¢¢¢
DATA READ/WRITE..
SW MODE..
VIDEO IN/OUT..
VTR FUNCTION..
VTR OPTION..
BATTERY..
MIC/AUDIO..
LENS SHADING..
DATA READ/WRITE
Item
Setting
options
Remarks
FILE SELECT1/2/3/4 For storing the menu setting parameters in
the memory. For further details, refer to
“How to use file select.” (page 28)
SW MODE
Item
Setting
options
Remarks
LOW GAIN 0dB
:
36dB
For setting the gain allocated to the LOW
GAIN switch.
A setting from 0 to 36 dB can be selected.
SUPER V ON
OFF For selecting the vertical high resolution
mode.
QUICK FOCUS ENABLE
DISABLE For enabling or disabling the quick focus
function.
MID GAIN 0dB
:
9dB
:
36dB
For setting the gain allocated to the MID
GAIN switch.
A setting from 0 to 36 dB can be selected.
HIGH GAIN 0dB
:
18dB
:
36dB
For setting the gain allocated to the HIGH
GAIN switch. A setting from 0 to 36 dB can
be selected.
ATW PRE
Ach
Bch
OFF For setting at which WHITE BAL switch
position the full time auto white balance
mode is to be enabled.
PRE:ATW is enabled at the PRE position.
Ach: ATW is enabled at the Ach position.
Bch: ATW is enabled at the Bch position.
OFF: Full time auto balance is not
performed.
FULL AUTO ENABLE
DISABLE For enabling or disabling the full auto
function.
SCENE FILE ENABLE
DISABLE For enabling or disabling the scene file
function.
ENABLE: The scene file function is
enabled.
DISABLE: The scene file function is
restricted to the user files.
Menu contents
SCENE MENU (main menu)
“ ” indicates the factory setting.
PROCESS
Item
Setting
options
Remarks
H DETAIL –10
:
+00
:
+10
For setting the amount of detail in the
horizontal direction.
V DETAIL –06
:
+00
:
+10
For setting the amount of detail in the
vertical direction.
DTL CORING –2
:
+0
:
+8
For setting the amount of detail coring.
CHROMA LEVEL –2
:
+0
:
+2
For setting the chroma level.
MASTER PED –26
:
+00
:
+26
For setting the master pedestal level.
KNEE POINT 90%
:
100%
For setting the knee point position.
H.DTL FREQ. 2MHz
3MHz
4MHz For setting the detail boost frequency in the
horizontal direction.
MATRIX A
B
ADJ For selecting the color compensation matrix
table.
A:
Standard setting
B: For shooting under fluorescent lighting.
ADJ: Changes to the MATRIX value set for
<ADDITIONAL PROCESS>.
CHROMA PHASE –31
:
+00
:
+31
For setting the chroma phase.
The skin tone takes on a reddish tinge in
the “+” direction.
WRITE For saving the data.
ADDITIONAL PROCESS
Item
Setting
options
Remarks
MATRIX ADJ.R-G
R-B
G-R
G-B
B-R
B-G
+00
+00
+12
+00
+00
+00 This is effective when ADJ has been
selected for the “MATRIX” item of
<PROCESS>. The MATRIX table can be
adjusted/set as desired.
WRITE For saving the data.