Panasonic PV DM2092 - Manual (Page 12)

12 For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Connections (continued)
Notes on audio output from the optical digital
audio output connector
Enjoying digital audio output from the
digital audio output connector
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See page 59.)
*2 Sound having 96 kHz sampling is converted into 48 kHz
sampling when it is output from the unit’s optical digital
audio output connector.
For your reference:
• Dolby Digital is a digital sound compression
technique developed by the Dolby Laboratories
Licensing Corporation. Supporting 5.1-channel
surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of
sound data to be efficiently recorded on a disc.
• Linear PCM is a signal recording format used in CDs.
While CDs are recorded in 44.1 kHz/16 bit, DVDs are
recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder,
you will obtain the full benefit of Pro Logic from the
same DVD movies that provide full 5.1 channel
Dolby Digital soundtracks, as well as from titles with
the Dolby Surround mark. For information on
Panasonic or Technics Dolby Pro Logic Surround
Sound Decoders please contact your local dealer.
Ready Checklist
Turn down the volume, then turn this unit, as well
as other equipment to be connected, off before
proceeding with connection.
Do not block ventilation holes of any equipment
and arrange them so that air can circulate freely.
Read through the instructions before connecting
other equipment.
Ensure that you observe the color coding when
connecting audio and video cables.
■
Unit
➛ ➛ ➛ ➛ ➛
Amplifier
➛ ➛ ➛ ➛ ➛
Speaker
Audio connections
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. © 1992-1997 Dolby Laboratories,
Inc. All rights reserved.
Amplifier
Unit
Speaker Speaker
AUDIO OUT
R L
R L
AUDIO IN
Disc
DVD
Video
CD
C D
M P 3
Sound
recording
format
Dolby Digital
Linear PCM
(48/96 kHz
16/20/24 bit)
dts
MPEG 1
Linear PCM
MP3
Optical digital audio
output from connector
Dolby Digital bitstream
(1-5.1 ch) or OFF (no
output)*
1
Linear PCM (2ch)
(48 kHz sampling/16 bit
only)*
2 or no output* 1
Bitstream or no output* 1
PCM
(44.1 kHz sampling)
Linear PCM
(44.1 kHz sampling)
Linear PCM
(It depends on the MP3 file)
DM2092 (P12-13) connect.p65 2002/06/19, 14:52 12