Panasonic PV DM2092 - Manual (Page 19)

19
Basic Operation
Copy Your Tapes (Dubbing)
• Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape. Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY, then
press PAUSE at
starting point to put
in Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
press STILL/PAUSE
immediately to put in
Standby mode.
Press STILL/PAUSE
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
. The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press
to select “TV”, then press SET
for SET UP TV screen.
c Press to select “INPUT SELECT,” and
then press SET to select “TUNER” or “LINE.”
d Press ACTION twice to exit this mode.
Caution
Connections you’ll need to make
L-AUDIO IN-R VIDEO IN
Recording (Editing) unit
OUT
IN
IN FROM
ANT.
OUT TO
TV
VIDEO R-AUDIO-L
Playing (Source) VCR
MONO
(Perform operation of steps 4 and 5 on both units at same time.)
*Important: If a remote control button does not work
when pressed, press the button on
the remote and try the button again.
STOP
1 2 3
125 LINE
(CABLE)
69
(TV)
or
DM2092 (P18-19) play_rec_copy.p65 2002/06/19, 14:52 19