Panasonic PV DM2092 - Manual (Page 34)

34
For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
1 Press SEARCH* in
Playback or Stop
mode to display
INDEX SEARCH
screen, and then
press number keys
to select the
recording number.
• To calculate
number, see below.
Press FF or REW to
start search.
Index Search
Go directly to the desired recording.
• Make each entry within 10 seconds,
or the Index Search mode will be
canceled.
• If Index Search is started very close
to an index mark, that index mark
may not be counted in the search.
2 Play begins at
search end.
To search forward
or back 1 index,
press FF or REW
while screen left is
displayed (10
seconds).
NOTE: indicates start points of each recording.
6 1 5 7 2 3 4
■ ■ ■ ■ ■
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 7 5 3 4 6 2
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH : FF
REVERSE SEARCH : REW
NEXT : SEARCH
EX I T : STOP
I NDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
I NDEX SEARCH
FF
REW
Notes
To cancel, press PLAY or STOP.
DM2092 (P34-37 tape OP).p65 2002/06/19, 14:52 34