Panasonic PV DM2092 - Manual (Page 13)

13
Initial Setup
Unit
Optical digital audio
cable (optional)
Dolby Digital Decorder/
dts processing (optional)
Amplifier
Center speaker
Front
Speaker Front
Speaker
Subwoofer
Surround
speaker Surround
speaker
■
Unit
➛ ➛ ➛ ➛ ➛
Dolby Digital Decoder
➛ ➛ ➛ ➛ ➛
Amplifier
➛ ➛ ➛ ➛ ➛
Speaker
or
Unit
➛ ➛ ➛ ➛ ➛ dts
(digital theater systems) Decoder
➛ ➛ ➛ ➛ ➛
Amplifier
➛ ➛ ➛ ➛ ➛
Speaker
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts
bitstream is output from the unit Optical digital audio output connector. When the unit is
connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio
in your home. [An optical digital audio cable (optional) is required when an optional Dolby
Digital decoder or dts decoder is used.]
Notes on connecting an Optical
digital audio cable (optional)
• Firmly connect the cable to the
connector.
IMPORTANT NOTE:
Caution for optical digital audio
output connector:
• When connecting an amplifier (with
an Optical digital input connector)
which does not contain the Dolby
Digital or dts decoder, be sure to
select “OFF” at “Dolby Digital” and
“OFF” at “dts” of the Settings for
DVD Operation “AUDIO OUTPUT”
(see page 59). Otherwise, any
attempt to play DVDs may cause
such a high level of noise that it
may be harmful to your ears and
damage your speakers.
• When a dts decoder is connected,
please select “Bitstream” at “dts” of
the Settings for DVD Operation
“AUDIO OUTPUT”. If “OFF” is
selected, there will be no sound.
(See page 59).
• Video CDs and CDs can be played
as normal.
Note:
• Some dts decoders which do not
support DVD-dts Interface may not
work properly with the unit.
DM2092 (P12-13) connect.p65 2002/06/19, 14:52 13