Polaroid Polaview 305 - Manual (Page 31)

Macintosh computers Connecting a Macintosh monitor requires the Polaview
VGA/MAC adapter (part number C804) and the existing
monitor cable. Use the Polaview adapter only.
1 Disconnect your computer-to-monitor cable at the computer
end.
2 Connect the free end of the monitor cable to the Polaview
VGA/MAC adapter.
The Macintosh-
to-LCD connection
3 Connect the free end of the Mac-to-LCD adapter to the pro-
jector VGA OUT connector.
Note: Macintosh users that do not connect an external
monitor may need to set Model 305 sense lines to achieve
the desired display resolution. See
Appendix C: Sense lines
for more information.
4 Use the Polaview MAC to LCD connector cable (part number
C802-6) to link the projector to the computer. Connect the
end marked LCD to the projector COMPUTER IN connector,
and the end marked COMPUTER to the computer video out-
put connector.
26 Detailed setup
Mac-to-LCD
cable
Projector
Macintosh