Polaroid Polaview 305 User Manual
Page 52
CLEAR
Press the CLEAR key to clear the screen to a bright white
background. This is useful when you want to show a trans-
parency during your presentation. Press and hold the
CLEAR key for approximately two seconds to clear the
screen to black. To display video once more, press the
CLEAR key again.
(Over-temp
This light illuminates if the projector becomes too hot or
indicator light,
when one of the fans malfunctions. When this light
control panel only)
illuminates, the lamp automatically shuts off. In the unlikely
event of an over-temperature condition, see Chapter 6,
Troubleshooting,
for more information.
(Lamp-indicator
This light illuminates when the lamp needs to be replaced.
light, control panel only)
It also flash for about 90 seconds after you turn off the
lamp.
48 Using the projector