Connecting video and audio to the projector – Polaroid Polaview 305 User Manual
Page 38
Connecting video and audio to the projector
This section describes how to connect audio and video to
your projector. The Polaview Model 305 Projector has multi-
ple inputs for audio and video. If you are connecting only
one audio or video source to your projector, use the VIDEO
1 and AUDIO 1 ports. Make sure that you connect your
audio and video to the corresponding group. If you connect
video to group 1 and audio to group 2, you cannot hear the
audio. Even though you connect both COMPUTER AUDIO
IN and AUDIO IN, only one of them is active:
•
If you select computer video, COMPUTER AUDIO IN is
active.
•
If you select NTSC/PAL/SECAM/S-video, AUDIO 1 IN is
active.
Connecting video
The projector can project video from NTSC, PAL or
from a VCR
SECAM sources (i.e., VCRs, laserdisc players and video
cameras).
The projector
connected to
a VCR
Detailed setup 33
VIDEO RECORDER – VCR
VIDEO OUT
AUDIO OUT