Polaroid Polaview 305 - Manual (Page 35)

DEC 3C3 video connections
If you have a DEC workstation with 3C3 connectors at the
computer and monitor video ports:
3C3 connector
1 Disconnect your computer-to-monitor cable at the computer
end.
2 Connect the free end of the monitor cable to the Polaview
DEC 3C3-to-LCD adapter (part number C947-10).
3 Connect the free end of the DEC 3C3-to-LCD adapter to the
projector COMPUTER OUT connector.
4 Use the Polaview DEC 3C3-to-LCD connector cable (part
number C948-6) to link the projector to the computer. Con-
nect the end marked LCD to the projector COMPUTER IN
connector, and the end marked COMPUTER to the worksta-
tion video-output connector.
BNC video connections
If your workstation does not have a 13C3 video-port connec-
tor at the computer video port, but has a BNC connector at
the monitor, you need the optional Polaview BNC cables.
1 Note which BNC connectors you are currently using with
the monitor. (You always use the R, G, and B connectors,
but the way you use the H and V connectors depends on the
computer configuration.) Disconnect your computer-to-
monitor cable at the monitor (BNC) end.
30 Detailed setup