Cleaning/changing air filters – Polaroid Polaview 305 User Manual

Page 95

Advertising
background image

Cleaning/changing air filters

To make sure that your projector operates safely and effi-
ciently, you should change or replace the filters after every
250 hours of operation. It is best to change or clean all of the
filters at one time. To clean the filters, wash them in a solu-
tion of warm, soapy water.

Your Polaview Model 305 Projector has three air filters.

Access to the top filter

To gain access to the top filter:

1 Remove the left side door, as described in the previous sec-

tion.

2 Unscrew the three screws located at the top of the left side

area (see the illustration below).

The three left-top
retaining screws

3 Unsnap the top left cover by lifting it up and pulling it out

(see the following illustration).

92 Maintenance

Advertising