Perle Systems Speed LE 1P - Manual (Page 22)

Page 22
Chapter 2 Installing Drivers and Host Cards
5. In the Device Manager window, click on the Multiport serial adapters icon to display the
currently installed devices.
6. In the Device Manager window, double click on the device whose properties you want to
view or change
The device Properties tabbed window is now displayed.
7. In the device Properties window, click on the Port Settings tab to display the Port
Settings page.
8. In the Port Settings page, set the Port Number, Baud Rate, and any other configuration
parameters you require.
DSR Always On—This feature is used for systems where the wiring does not support the
DSR signal but the Host application still requires that the DSR be active. When the DSR
Always On option is enabled, the driver will always report to the application that the DSR
signal is "on".